01- Setup & Installation
If you bought the Creator Pro printer(It does not support WIFI connection at present), to get the instruction of printing methods, please refer to Chapter 6...
Sat, 5 Aug, 2017 at 8:03 PM
Thank you for choosing Flash Forge 3D printer. If you bought the Dreamer 3D printer, please read page 17 of user guide about loading/unloading filament....
Sat, 5 Aug, 2017 at 8:04 PM
The turbo fan baffle and turbo fan are installed on the left side of the extruder, you will need M3*6 bolts. Click the link to watch the relevant video: ...
Sat, 5 Aug, 2017 at 8:07 PM
Thank you for choosing FlashForge 3D printer. If you bought the Dreamer 3D printer, please read the filament installation instruction on page 15 of User...
Sat, 5 Aug, 2017 at 8:08 PM
All the bolts and wrenches are placed within the tool box/bag. With specific labels, you can find what you need quickly. If you bought the Dreamer 3D pr...
Sat, 5 Aug, 2017 at 8:15 PM
If the filament is placed under the build plate, just rotate the z-axis threaded rod clockwise to lift the build plate to the point where you can easily tak...
Sat, 5 Aug, 2017 at 8:16 PM
Thank you for choosing FlashForge 3D printer. The unpacking instructions are included in the Quick Start Guide.
If you bought the Dreamer 3D printer, you...
Sat, 5 Aug, 2017 at 8:17 PM
Thank you for choosing FlashForge 3D printer.
If you bought the Dreamer 3D printer, you can find the PDF User Guide in the SD card along with our product...
Sat, 5 Aug, 2017 at 8:18 PM
Learn how to install extruder on Creator Pro / Dreamer.
If you bought the Dreamer 3D printer, please read the extruder-installation instruction on ...
Sat, 5 Aug, 2017 at 8:19 PM